VSP Series of Programmable Power Supplies set a new standard for flexible, reliable AC to DC power systems in OEM, Industrial and Laboratory applications. These are designed with excellent thermal management and can be conveniently stacked in rack mounts without any space between them for ventilation. The zero Voltage soft-switching technique employed in them virtually eliminates the switching transients to derive lower noise, which is more closer to linear levels. This also helps increasing the overall conversion efficiency which in turn decreases the heat generation, thus reducing the stress on the power components which results in greater reliability.
 

This Triple output programmable power supply is ideal for use in College, Research Labs etc as it very in small in size and easy to carry.
 Voltage/current for all 3 channels can be displayed at the same time.
 Can be used in series or in parallel connection.
 High accuracy and high regulation with 1mV / 1mA.
 Set voltage and current with rotary knob.
 Small in size i.e ½ rack, 2U high.
 Three channel voltage output set output time with 1 ~ 999999S.

The New Series offers a range of Linear DC Regulated Power Supplies for use in Laboratories & Industries. Output voltage and current values are displayed on a 3 digit DPM. These table top units are designed for 19” Rack Mounting. There are ten models to choose from, with output power ranging from 30 watts to 300 watts. Output voltages of 0-16V, 0-32V, 0-64V and 0-128V DC are available for single output supplies.

* Fully Metallic Construction to Stop Radiated EMI
* Compact & Rugged Design
* DC Output ON/OFF On Each Main Output
* Voltage & Current Output Preset Facility for Safety
* Constant Voltage / Constant Current Mode
* 3 Digit DPM V and A
* High Stability & Close Regulation ±0.01% +3mV
* Low Ripple <1mV rms
* Overload Protection
* Convection Cooled - No Fans
* Meets International Safety Standards
  [TD3202M]
 Download Catalogue
 
Research laboratories demand power supplies that are safe to use, rugged in construction and reliable in operation. Our “Tough” series Single and Multiple output DC Power supplies are designed specifically to meet these requirements as per the International Safety Standards for Laboratory, Industrial or Educational application. Our Tough Series power supply provides low ripple, high regulation and increased stability.
 

Din Rail Power Supply – 35W / 60W / 120W / 240W
 Wide Input Range : 90-264V AC, 47-63Hz, 127-380V DC / 120-380V DC, Output Power Ready Signal, High Efficiency  Switch-mode Power Supply, Short Circuit Protection, Over Voltage Protection, Over Load Protection, High Reliability, Compact-economical, Fully Protected Operation, Compliance with UL508, UL60950 Requirement, 100% Full Load Burn-in-test, Hold up Time 16ms, Din Rail / Panel Mounting

Specially Designed for OEM Use Battery Eliminator / Float Charger.
 Output Voltage Adjustability ±10%.
 Quality Components and Conservative Ratings for High Reliability 
 and Long Life.
 High Regulation, Low Ripple and Noise.
 Suitable for Bench / Rack Use.

Aplab’s all new 8600 series of Programmable AC Power Source is compact in size and light in weight due to the use of the state of the art switch mode high frequency PWM technology. These A C Power Sources come with a built in PFC with universal input to provide a typical input power factor of 0.99 at full load, suitable for all the utility power outlets in almost all the countries. The output AC is of full rated current and is delivered in the voltage range of 135V AC or 270V AC, which is user selectable, using a push switch on the front panel.

Built-in total protection against overvoltage or under-voltage or over-load or over-temperature. Higher speed of correction unto 70V/sec for 3-phase systems. Assured regulated output even under unbalanced load or input lines in three phase models. Compact size, aesthetic looks, smaller foot-print & euro style comfort handles.